Sada Medical VA-SD Digital Display Vertical Pressure Steam Sterilizer – 35L / 50L / 75L / 100L | Fully Automatic with Hand Wheel Safety Door

Dependable Vertical Sterilization With a Clear Digital Readout

Not every facility needs pulse vacuum cycles or complex test programs—but everyone needs to see what their sterilizer is doing. The Sada Medical VA-SD Digital Display Vertical Pressure Steam Sterilizer gives you a bright, easy-to-read digital panel that shows working status, temperature, and cycle phase at a glance. Processor-controlled automation manages the entire sequence—from cool air exhaust to sterilization, steam discharge, and automatic shut-off—so your team can load the chamber, close the hand wheel door, and walk away.

Available in 35L, 50L, 75L, and 100L capacities, this vertical autoclave machine is built for hospitals, clinics, dental practices, pharmaceutical labs, and research institutes that process unwrapped solid instruments, glassware, and simple media daily. The chamber and outer body are fully fabricated from 304 stainless steel, giving you the corrosion resistance and easy-clean surface your sterilization room demands. And with seven independent safety protections—including over-temperature, over-pressure, anti-dry heating, and a safety interlock door—the VA-SD is engineered to protect your staff and your instruments equally.

Why the VA-SD Earns Its Place in Your Sterilization Room

• Clear Digital Display & Touch-Key Control
  The bright digital panel shows real-time chamber temperature and working status. Sealed membrane touch keys are intuitive to operate and easy to wipe down after a long shift. There’s no complex menu tree to navigate—set your temperature (105–134°C) and timer (0–99 minutes or 0–99 hours 59 minutes), and the processor controlled autoclave handles the rest.

• Fully Automatic Cycle With Auto Cool-Air Purge
  At the start of every cycle, the VA-SD automatically exhausts cool air from the chamber to ensure effective steam penetration. Then it heats to the preset temperature, maintains the sterilization plateau for the exact time you’ve set, exhausts steam, and finally cuts power with an audible beep—letting your staff focus on other tasks while the vertical steam sterilizer does its job.

• Hand Wheel Quick-Open Door With Safety Interlock
  The hand wheel door uses a self-inflating silicone seal that compresses securely when the chamber pressurizes. A safety interlock system prevents the door from being opened while the chamber is under pressure, and the cycle cannot start unless the door is correctly sealed. This pressure steam sterilizer is designed for busy environments where multiple operators share sterilization duties, and safety cannot rely on memory alone.

• Fully 304 Stainless Steel Structure
  The sterilization chamber, door, and outer panels are all constructed from 304 stainless steel—not painted steel, not plastic. This means the VA-SD resists rust from repeated steam exposure, stands up to regular disinfection wiping, and maintains a professional appearance after years of daily use. It’s a fully stainless steel autoclave built for the long haul.

• Optional Drying Module – Upgrade When You Need It
  While the VA-SD is optimized for unwrapped solid instruments, a factory-installed drying system can be added upon request. If your protocol later expands to include textiles, gowns, or wrapped packs that must emerge dry, this flexibility protects your initial investment.

• Seven Independent Safety Protections
  The VA-SD doesn’t rely on a single safety layer. It includes: heater protection, anti-dry heating cut-off, safety interlock door, over-temperature protection, over-pressure protection, automatic release safety valve, and an electric safety protective device. If the water level drops too low, the machine automatically cuts power and alarms. This medical autoclave is built with the operator’s peace of mind in mind.

• CE & ISO 13485 Certified Manufacturing
  Manufactured under Sada Medical’s EN ISO 13485:2016 quality management system and carrying the CE mark, the VA-SD meets international medical device standards. It’s a disinfection and sterilization equipment solution you can integrate into any regulated healthcare or laboratory environment with confidence.

Who Uses the VA-SD Vertical Autoclave?

This digital display vertical autoclave is purpose-built for facilities that need reliable, high-capacity sterilization of unwrapped, solid instruments:

• Hospitals & CSSD Departments – general instrument reprocessing, small tray sterilization, and backup cycles
• Dental Clinics & Oral Surgery Centers – forceps, mirrors, scalers, elevators, and impression trays
• Medical Clinics & Outpatient Departments – scissors, forceps, speculums, hemostats, kidney trays
• Pharmaceutical & Biotech Labs – glassware, liquid reagents in open containers, media preparation
• Veterinary Practices – surgical instruments, dental probes, and stainless steel equipment
• Research Institutes & University Labs – culture tubes, Petri dishes, pipette tips, and bio-waste
• Tattoo & Piercing Studios – tubes, grips, needle bars, and tweezers

If you’ve been searching for a digital vertical autoclave for hospitals, a processor controlled steam sterilizer for labs, or a stainless steel vertical autoclave with safety door, the VA-SD is engineered to fit your workflow.

Technical Specifications

All models include digital display, processor control, hand wheel safety door, 2 stainless steel baskets, automatic cool air exhaust, and seven safety protections. Drying module available on request.

What’s Included with Your VA-SD Sterilizer

• Sada Medical VA-SD vertical digital display autoclave (choose 35L, 50L, 75L, or 100L)
• 2 stainless steel sterilizing baskets
• Power cord and water connection kit
• Detailed user manual and access to Sada Medical’s online operation video library
• Optional: factory-installed drying module (confirm at time of order)

After-Sales Support You Can Rely On

Sada Medical backs every VA-SD sterilizer with a 12-month warranty and a support team that responds within 24 hours. Questions about cycle settings, routine maintenance, or installation? We’re happy to guide you via video call or photo instruction. With exports to healthcare providers in over 50 countries, we understand that dependable autoclave sterilization support keeps your facility running.